New Construction Electrical in Bel Air, CA

Buzo Electric Co handles new construction electrical in Bel Air, CA as a design-build partner to the architect, GC, and owner. We are a CSLB C-10 contractor and the integrator on the same contract: one firm runs the load calculation, pulls the 400A service, wires the structured cabling, and programs the Control4 or Josh AI system at trim-out. If you are building a custom home in Bel Air, you get one set of drawings, one point of accountability, and systems that work the day you move in. Contact us early, at schematic design if possible, and we will coordinate the electrical and low voltage scope as one package.

Our New Construction Electrical Services in Bel Air, CA

New construction electrical in Bel Air, CA spans far more than branch circuits, and we carry the full scope under one license.

• Design-build electrical for custom homes. We work with your architect and GC from load calculation through rough-in and trim-out, so the power plan and the control plan are engineered together, not reconciled later.
• 200A and 400A service, Span smart panels, and subpanels. Estate-scale homes in Bel Air routinely need a 400A service to carry HVAC, pools, EV charging, and automation. We size it on paper before anyone orders switchgear.
• Lutron lighting control and motorized shades. Keypads replace banks of toggles. Scenes are engineered per room, programmed by the same firm that wired the circuits behind them.
• Control4 and Josh AI whole-home automation. Design, rack build, head end, programming, and ongoing support, all from the electrician of record.
• Home theater, media rooms, and whole-home audio and video. Structured wiring goes in at rough-in, racks and displays at trim-out, with one firm responsible for both.
• Generac standby power and EV charging. Whole-house automatic standby generators with an automatic transfer switch, plus Level 2 chargers and Tesla Wall Connector installation, designed into the service from day one.

Why Bel Air, CA Homeowners Choose Us

We are the integrator-electrician: the only firm on your project that holds the C-10 and programs the Control4 or Josh AI system. That matters on a new build. The lighting control design dictates the circuiting, the rack location dictates the conduit runs, and the standby power plan dictates the service size. When one firm owns all of it, nothing falls between trades.

We sell whole systems and whole projects: new builds, full renovations, estate upgrades, and commercial build-outs. We never run service calls. Architects, interior designers, GCs, and AV consultants are a primary audience for us, because a clean specification early saves change orders later. Owner Aaron Buzo leads the firm, CSLB C-10 #1048529, licensed since 2019, bonded, with workers' comp in place.

Technical fidelity is how we explain the job. You will hear the amperage, the brand, the model line, and what each decision makes possible. A 400A service is not a line item to us; it is a load calculation with every tandem of HVAC, kitchen, pool equipment, EV charging, and future capacity accounted for before the panel schedule is drawn.

Serving Bel Air, CA and Nearby Areas

Our shop sits in West Adams, beside Culver City, and we build across the Westside and greater Los Angeles. Beyond Bel Air, we serve Los Angeles, Beverly Hills, Santa Monica, Malibu, Pacific Palisades, Brentwood, West Hollywood, Culver City, Marina del Rey, Venice, Calabasas, Hidden Hills, and Manhattan Beach, CA. Bel Air sits well inside our daily project footprint.

New Construction Electrical Questions We Hear in Bel Air, CA

When should the electrical contractor join a new build?

At schematic design, before the GC prices the job. The lighting control layout, rack and head end location, generator pad, and service entrance all affect the architecture. Bringing us in early means the load calculation drives the service size instead of the other way around, and the low voltage pathways are on the drawings before framing starts.

Do I need a 200A or 400A service for a new Bel Air home?

The load calculation decides, not a rule of thumb. A home with multiple HVAC systems, a pool, Level 2 EV charging, and a Generac standby generator typically pushes past what a 200A service carries comfortably. For estate-scale builds we often design a 400A service with a Span smart panel, which gives you circuit-level monitoring and load management from day one.

Why combine electrical and automation under one contract?

Because the two scopes are one system. Lutron keypad locations change the switch legs. Control4 and Josh AI dictate structured wiring runs that must be in the walls at rough-in. When the firm that pulls the wire also programs the scenes, the handoff risk disappears and the trim-out schedule holds.

Does new construction scope apply to older Bel Air properties?

Yes, when the project is a full renovation or estate upgrade. The typical home across Los Angeles County was built around 1965, per U.S. Census Bureau ACS estimates. Homes of that era were never wired for modern loads, so a gut renovation is effectively a new build from the panel out: new service, new structured wiring, and a current-code electrical plan.

Get Started

If you are planning new construction electrical in Bel Air, CA, contact us with your drawings or even a concept plan. We will review the scope with you and your architect or GC, run the preliminary load calculation, and lay out the integration plan as one coordinated package. The earlier we see the project, the cleaner the build; request a consultation and we will take it from there.

Related guide: new construction electrical — Complete Guide

Prefer to talk it through? Call (323) 252-7498 — a quick call is usually the fastest way to get a straight answer for your situation.