Commercial Electrical and AV in Los Angeles, CA

Buzo Electric Co delivers commercial electrical and AV in Los Angeles, CA, from one licensed firm: a C-10 electrical contractor that also designs, programs, and supports the control and AV systems in the same space. We build out offices, restaurants, and tenant improvements alongside the general contractor, from service upgrade and panel schedule through structured wiring, rack, and boardroom AV. One contract, one drawing set, one firm responsible for power and low voltage together.

What Our Commercial Electrical and AV Covers

We take on whole build-outs and whole systems, planned with the GC and the design team from the first set of drawings.

• Tenant improvement electrical. Full power distribution for office and restaurant TIs: load calculation, panel and subpanel layout, branch circuits, lighting, and dedicated circuits for kitchen and IT loads. We work as the electrical contractor of record on the project, coordinating rough-in with the other trades.
• Electrical service upgrades. 200A and 400A service upgrades where the tenant's load calculation outgrows the existing gear, plus Span smart panels and subpanels where circuit-level monitoring and control earn their place.
• Boardroom and conference room AV. Displays, audio, video conferencing connectivity, and control programmed on Control4, so a meeting starts from one keypad or touch panel instead of four remotes.
• Lutron lighting control. Commercial lighting control and motorized shades, engineered as scenes: presentation, all-hands, dinner service, close. We design the keypad layout, program the scenes, and support them after turnover.
• Structured wiring and head end. Low voltage cabling for network, AV, and control, terminated at a properly built rack with labeled runs and documentation the next contractor can read.
• Distributed audio and video. Whole-space audio and video for restaurants and open offices, zoned so the bar, the dining room, and the patio run independently.
• EV charging for commercial properties. Level 2 chargers and Tesla Wall Connector installations for employee and tenant parking, sized against the building's available capacity and the load calculation.
• Generac standby power. Automatic standby generator installation with an automatic transfer switch, so the loads you designate carry through an outage without anyone touching a breaker.

If your project needs a certified electrical contractor and an AV integrator, you do not need two. The same firm that holds the C-10 programs the system.

How Commercial Electrical and AV Works in Los Angeles, CA

1. Drawings, load calculation, and scope

We start with the plans, or with the GC and architect if plans are still forming. We run the load calculation, confirm whether the existing service carries the new loads or a 200A or 400A service upgrade is needed, and define the AV and control scope in the same document. Design-build means we flag conflicts on paper, not in drywall.

2. Rough-in

Our crews run power and low voltage together: branch circuits, lighting, dedicated circuits, and structured wiring for AV, network, and control, all in one coordinated rough-in. One firm pulling both means the display backbox, the conduit, and the circuit behind it land in the same stud bay the first time.

3. Trim-out and rack build

After inspection and finishes, we set devices, keypads, displays, and speakers, and build the head end: a rack with labeled terminations, clean power, and documented runs. Panels get typed schedules, not pencil scrawl.

4. Programming and commissioning

We program the Control4 system and the Lutron scenes, test every circuit and every zone, and commission the system against the original scope. Boardroom AV gets run through real meeting scenarios before turnover, not just a signal check.

5. Turnover and support

You get documentation, a walkthrough with your staff, and ongoing programming support from the firm that built the system. When the floor plan changes in two years, the people who wired it reprogram it.

What Affects the Price of Commercial Electrical and AV in Los Angeles, CA

Project cost follows the engineering, and a few factors drive most of it:

• Service capacity. If the load calculation shows the existing service is short, a 200A or 400A service upgrade changes the scope. Utility coordination and new gear are a different project than reusing existing capacity.
• Square footage and circuit count. More rooms, more zones, and more dedicated loads mean more panels, more branch circuits, and more rough-in labor.
• AV and control scope. A single boardroom with one display prices differently than distributed audio across a restaurant plus Lutron scenes in every zone. Equipment lines and zone counts set the number.
• Building access and condition. Occupied buildings, after-hours work windows, older conduit, and limited ceiling access all add labor. A shell space with open framing is the simpler path.
• Finish level. Flush-mount keypads, in-ceiling speakers, and motorized shades carry different material and coordination costs than surface-mount basics.

Every project gets a written, line-item proposal built from your drawings and a site walk. Request a quote and we will put real numbers against your actual scope.

Why Los Angeles, CA Chooses Us

Buzo Electric Co is the integrator-electrician: the only firm on your project that holds the C-10 license and programs the Control4 or Josh AI system. Owner Aaron Buzo runs the firm from our shop in West Adams, beside Culver City, and we build for people who expect things to work. CSLB C-10 #1048529, bonded, with workers' compensation coverage.

We sell whole projects, not service calls: commercial build-outs, tenant improvements, full renovations, and estate work. Specifiers are a primary audience for us; architects, GCs, and AV consultants get drawings, load calculations, and model lines, not vague allowances. When we explain the job, we say the amperage, the brand, and what it makes possible.

Our footprint covers greater Los Angeles, including Beverly Hills, Santa Monica, Culver City, West Hollywood, Marina del Rey, Venice, Brentwood, Bel Air, Pacific Palisades, Malibu, Manhattan Beach, Calabasas, and Hidden Hills.

Commercial Electrical and AV Questions, Answered

Do I need separate electrical and AV contractors for a tenant improvement?

No. We hold the C-10 and do the integration work under one contract, so power, structured wiring, and AV are designed and built by one firm. That removes the coordination gap where the electrician's conduit and the AV company's cable plan never quite meet.

How do I know if my space needs a 400A service upgrade?

The load calculation decides it. We total your HVAC, kitchen equipment, lighting, EV charging, and IT loads against the existing service; if the math is short, we spec the upgrade and handle the utility coordination. A restaurant TI with electric kitchen equipment is a common case where 200A does not cover the load.

Can you add EV charging to our commercial parking?

Yes. We install Level 2 chargers and Tesla Wall Connectors for commercial properties, sized against your panel capacity and load calculation. If the service cannot carry the chargers, we price the service upgrade in the same proposal so you see the full picture once.

What does Lutron lighting control add in a commercial space?

Scenes. Instead of banks of switches, your staff presses one keypad button for presentation, dinner service, or close, and every zone lands where it should. We design the keypad engraving, program the scenes, and adjust them after you have lived with the space.

When should you bring us into the project?

At the drawing stage. Design-build with the architect and GC lets us run the load calculation, place the rack and head end, and coordinate rough-in before framing closes. Changes on paper cost pages; changes after drywall cost demolition.

Do you support the system after the build?

Yes. We program and support the Control4 and Lutron systems we install, and the documentation we hand over at turnover matches what is in the walls. When your layout or tenant changes, the firm that built the system updates it.

Get Started

Send us your drawings or describe the space, and we will walk the site, run the load calculation, and return a written, line-item proposal covering electrical, structured wiring, and AV together. Our office is open Monday through Friday, 8:00 to 16:00. Call us or request a quote, and bring us in before framing closes so the design-build work starts on paper, where it is cheapest to get right.

Related guide: commercial electrical services — Complete Guide

Prefer to talk it through? Call (323) 252-7498 — a quick call is usually the fastest way to get a straight answer for your situation.