New Construction Electrical in Beverly Hills, CA

Buzo Electric Co provides new construction electrical in Beverly Hills, CA for custom homes, full renovations, and commercial build-outs. We are a C-10 electrical contractor and integrator: the same firm that runs the 400A service also programs the Control4 or Josh AI system. Architects, interior designers, GCs, and homeowners bring us in at design-build to carry the project from load calculation through rough-in, trim-out, and final programming. Contact us and you get one licensed firm responsible for power, lighting control, automation, and AV on the entire build.

Our New Construction Electrical Services in Beverly Hills, CA

New construction electrical in Beverly Hills, CA is whole-project work for us, scoped with the architect and GC before drywall is a question. The core scopes:

• Design-build electrical for new and custom homes. Load calculations, panel schedules, circuit design, rough-in, and trim-out, coordinated with the architect and GC from the first set of drawings.
• Electrical service: 200A and 400A panels, Span smart panels, and subpanels. On estate-scale builds here a 400A service and a smart panel are the baseline, not an upgrade.
• Lutron lighting control and motorized shades. Keypads replace banks of switches. We engineer each scene, program it, and support it after move-in.
• Whole-home automation with Control4 and Josh AI. Design, programming, and ongoing support from the firm that pulled the structured wiring and built the rack at the head end.
• Generac standby generator installation. Whole-house automatic standby power with an automatic transfer switch, sized against the real load calculation for the house.
• EV charging. Level 2 chargers and Tesla Wall Connector installation, planned into the service capacity at design rather than squeezed in later.

Why Beverly Hills, CA Homeowners Choose Us

We are the integrator-electrician: the only firm on the project that holds the C-10 and programs the Control4 or Josh AI system. That matters on a new build. Low voltage and line voltage get designed together, so the structured wiring, keypad locations, and rack layout are decided once, on the drawings, not negotiated between trades in the field.

We sell whole systems and whole projects: new builds, full renovations, estate upgrades, and commercial build-outs. We do not run service calls. Specifiers get technical fidelity from the first meeting: the amperage, the load calculation, the brand and model line, how a scene is engineered, and what a 400A service makes possible for the house.

Buzo Electric Co is owned and led by Aaron Buzo, CSLB C-10 #1048529, licensed in 2019, bonded, with workers' comp. We install Lutron, Control4, Josh AI, Span, Generac, and Tesla Wall Connector.

Serving Beverly Hills, CA and Nearby Areas

Our shop sits in West Adams, beside Culver City, a short run from any Beverly Hills jobsite. Beverly Hills sits at the center of the Westside we work across: Los Angeles, Santa Monica, Malibu, Pacific Palisades, Brentwood, Bel Air, West Hollywood, Culver City, Marina del Rey, Venice, Calabasas, Hidden Hills, and Manhattan Beach.

New Construction Electrical Questions We Hear in Beverly Hills, CA

When should the electrical contractor join the project?

At design-build, alongside the architect and GC. The load calculation drives the service size, the panel location, and the generator sizing, and lighting-control and automation decisions shape the framing and structured wiring plan. Decisions made on paper cost nothing; the same decisions after rough-in cost walls.

Does an older lot change the electrical scope?

The typical Beverly Hills home was built around 1958, per U.S. Census Bureau ACS estimates, so many projects here are teardowns or full renovations rather than bare lots. Either way we design the service fresh: a new 200A or 400A panel, new circuits, and structured wiring throughout, rather than extending legacy infrastructure.

Do I need a 400A service for a new custom home?

The load calculation answers that, not a rule of thumb. A larger home with EV charging, a media room, motorized shades, and whole-house standby power often lands at 400A; a Span smart panel adds circuit-level monitoring and control on top. We run the numbers early and show you where the capacity goes.

Who programs the automation after the electrical is done?

We do. The same firm that wired the house designs and programs the Control4 or Josh AI system, builds the rack at the head end, and supports it after move-in. One contract, one point of responsibility, no handoff between an electrician and a separate integrator.

Get Started

If you are planning new construction electrical in Beverly Hills, CA, contact us while the project is still on paper. We review the drawings, run the load calculation, and return a scoped proposal covering power, lighting control, automation, and standby power as one package. The earlier we sit down with your architect and GC, the more options stay open.

Related guide: new construction electrical — Complete Guide

Prefer to talk it through? Call (323) 252-7498 — a quick call is usually the fastest way to get a straight answer for your situation.