New Construction Electrical in Venice, CA

Buzo Electric Co provides new construction electrical in Venice, CA for custom homes, full renovations, and commercial build-outs. We are a C-10 electrical contractor and integrator: the same licensed firm that runs the 400A service also programs the Control4 or Josh AI system. Architects, interior designers, GCs, and AV consultants bring us in at design-build to carry a project from load calculation through trim-out. Contact us with your plans and you get a single scope covering power, lighting control, structured wiring, standby power, and EV charging, engineered to work together from day one.

Our New Construction Electrical Services in Venice, CA

Our scope for new construction electrical in Venice, CA covers the systems a high-end build needs, specified and installed by one firm:

• Design-build electrical for custom homes. We work with the architect and GC from the drawing stage: load calculations, panel schedules, circuit layout, rough-in, and trim-out, all under our C-10 license.
• Electrical service: 200A and 400A panels, Span smart panels, and subpanels. We size the service for the real load of the finished home, including EV charging, standby power, and automation, so nothing gets value-engineered out later.
• Lutron lighting control and motorized shades. Keypads replace banks of toggles. Scenes are engineered per room and programmed by the same firm that pulled the wire.
• Whole-home automation with Control4 and Josh AI. Design, programming, and ongoing support for the control system, from the rack and head end out to every keypad and touchscreen.
• Home theater, media rooms, and whole-home audio and video. Low voltage and structured wiring planned at rough-in, not retrofitted after drywall.
• Generac standby generators and EV charging. Whole-house automatic standby power with an automatic transfer switch, plus Level 2 chargers and Tesla Wall Connector installation, all in the original load calculation.

Why Venice, CA Homeowners Choose Us

We are the integrator-electrician: the only firm on the project that holds the C-10 and programs the Control4 or Josh AI system. That matters on a new build. When one contractor owns the service upgrade, the lighting control, the structured wiring, and the head end, there is no gap between the line-voltage scope and the low-voltage scope, and no finger-pointing when a scene has to fire on day one.

We sell whole systems and whole projects: new builds, full renovations, estate upgrades, and commercial build-outs. We do not run service calls. Specifiers get technical fidelity in every conversation: the amperage, the load calculation behind it, the brand and model line, and how each scene is engineered. Owner Aaron Buzo leads the firm under CSLB C-10 #1048529, bonded, with workers' comp.

Context matters here too. The typical home across Los Angeles County was built around 1965, per U.S. Census Bureau ACS estimates, so a Venice new build or down-to-studs renovation is often the first chance a property has had to get a modern panel, structured wiring, and a control system designed as one scope. We plan the build so the home never needs that second retrofit.

Serving Venice, CA and Nearby Areas

Our shop sits in West Adams, beside Culver City, and Venice is a short run from it. We also take on projects in Los Angeles, Beverly Hills, Santa Monica, Malibu, Pacific Palisades, Brentwood, Bel Air, West Hollywood, Culver City, Marina del Rey, Calabasas, Hidden Hills, and Manhattan Beach. Our footprint covers the Westside corridor where most of our new-construction work lands.

New Construction Electrical Questions We Hear in Venice, CA

When should the electrical contractor join the project?

At design-build, before the drawings are final. The load calculation drives the service size, the panel location, and the conduit runs, and the lighting-control layout drives the keypad and switch-leg plan. Bringing us in with the architect and GC means the rough-in matches the finished design instead of forcing changes mid-frame.

Do I need a 400A service for a new custom home?

It depends on the load calculation, not a rule of thumb. A home with Level 2 EV charging, a Generac standby generator, electric appliances, and a full rack of AV and automation gear can justify 400A; a tighter program may run on 200A with a Span smart panel managing loads. We run the numbers first and size the service to the build. The service should be sized for the home's full life, not its first year.

Why should one firm handle both the electrical and the automation?

Because the systems are one system. The Lutron keypad, the Control4 processor, the Josh AI voice layer, and the circuits behind them all have to be designed together. When the firm that holds the C-10 also programs the head end, the structured wiring is in the right studs at rough-in and every scene works at trim-out. One contract, one point of accountability.

Can standby power and EV charging be built in from the start?

Yes, and that is the right time to do it. A Generac whole-house generator with an automatic transfer switch, plus a Level 2 charger or Tesla Wall Connector, gets included in the original load calculation and panel schedule. Planned at rough-in, these systems add conduit and breaker positions instead of a later service upgrade.

Get Started

If you are planning a build or a full renovation, send us the plans. We will review the drawings, run the load calculation, and return a complete scope for new construction electrical in Venice, CA covering power, lighting control, automation, standby power, and EV charging. Reach out through our contact page to start the conversation; the earlier we join the design, the cleaner the build.

Related guide: new construction electrical — Complete Guide

Prefer to talk it through? Call (323) 252-7498 — a quick call is usually the fastest way to get a straight answer for your situation.