New Construction Electrical in Pacific Palisades, CA

Buzo Electric Co provides new construction electrical in Pacific Palisades, CA for custom homes and full renovations, working design-build with your architect and GC from the first load calculation to final trim-out. We are a C-10 electrical contractor and integrator in one firm, so the same company that sets your 400A service also programs your Lutron, Control4, or Josh AI system. If you are planning new construction electrical in Pacific Palisades, CA, we deliver one scope, one point of accountability, and systems engineered to work together. Contact us to review your plans and receive a clear, line-by-line proposal.

Our New Construction Electrical Services in Pacific Palisades, CA

Every new construction electrical project in Pacific Palisades, CA starts with the drawings. We coordinate with the specifier, run the load calculation, and build the electrical and low voltage scope as one package.

• Design-build electrical for new and custom homes. We work with the architect and GC from schematic design through rough-in and trim-out, so panel locations, circuit counts, and device placement are decided on paper, not in the field.
• 200A and 400A service, Span smart panels, and subpanels. We size the service to the real load calculation. A large Palisades build with EV charging, standby power, and electric appliances often calls for 400A service, and we specify it from day one.
• Lutron lighting control and motorized shades. We engineer every scene and keypad layout before drywall, then program and refine the system at trim-out.
• Control4 and Josh AI whole-home automation. Design, structured wiring, rack build, head end, programming, and ongoing support from the same licensed firm that pulled the wire.
• Generac standby generator installation. Whole-house automatic standby power with an automatic transfer switch, integrated into the service design rather than bolted on later.
• EV charging. Level 2 chargers and Tesla Wall Connector installation, with the circuits and panel capacity planned into the original load calculation.

Why Pacific Palisades, CA Homeowners Choose Us

We are the integrator-electrician: the only firm on your project that holds the C-10 license and programs the Control4 or Josh AI system. That matters on a new build. Lighting control, structured wiring, standby power, and the electrical service all depend on each other, and splitting them across separate trades creates gaps at rough-in that surface at trim-out. We carry the whole scope, so nothing falls between contracts.

We sell whole systems and whole projects: new builds, full renovations, estate upgrades, and commercial build-outs. Architects, interior designers, GCs, and AV consultants work with us as specifiers because we speak in amperage, load calculations, and brand and model lines, not generalities. When we propose a system, you see what the 400A service carries, how each scene is engineered, and where every keypad lands.

Buzo Electric Co is owned and led by Aaron Buzo, CSLB C-10 #1048529, licensed in 2019, bonded, with workers' comp. We install Lutron, Control4, Josh AI, Span, Generac, and Tesla Wall Connector.

Serving Pacific Palisades, CA and Nearby Areas

Our shop sits in West Adams, beside Culver City, and we build across the Westside and beyond. Alongside Pacific Palisades, we serve Los Angeles, Beverly Hills, Santa Monica, Malibu, Brentwood, Bel Air, West Hollywood, Culver City, Marina del Rey, Venice, Calabasas, Hidden Hills, and Manhattan Beach, CA. Pacific Palisades sits at the western edge of that footprint.

New Construction Electrical Questions We Hear in Pacific Palisades, CA

When should the electrical contractor join a new build?

At schematic design, before permits. Service size, panel locations, generator placement, and rack locations affect the architecture itself. Bringing us in early means the load calculation drives the plans instead of forcing revisions later, and the structured wiring and lighting control layouts land on the drawings the GC bids from.

Is a 400A service worth it on a new custom home?

It depends on the load calculation, not the square footage. Across Los Angeles County the typical home was built around 1965, per U.S. Census Bureau ACS estimates, and a new build carries loads those homes never anticipated: Level 2 EV charging, electric ranges, heat pumps, and standby power. If the calculation supports it, we specify 400A service so the home never runs against its panel.

Can one firm handle both the electrical and the automation?

Yes, and on our projects it is the same crew. We hold the C-10, pull the line and low voltage, build the rack and head end, and program the Control4 or Josh AI system. One rough-in schedule, one trim-out, one firm responsible when the architect asks why a keypad moved.

Does the generator get planned with the house or added after?

With the house. A Generac whole-house standby system needs an automatic transfer switch sized to the service, a pad location, gas supply, and clearances, all easier to resolve on paper. On homes at this level, standby power is infrastructure, planned like the service itself.

Get Started

If you are an owner, architect, or GC planning new construction electrical in Pacific Palisades, CA, send us your plans. We will review the drawings, run a preliminary load calculation, and return a defined scope covering service, lighting control, automation, structured wiring, and standby power. Reach out during business hours, Monday through Friday, 8:00 to 16:00, and we will schedule a design review.

Prefer to talk it through? Call (323) 252-7498 — a quick call is usually the fastest way to get a straight answer for your situation.